Gauge valves
with test connection for pressure gauges, DIN 16271
SO Code:
-
Art. no.: -
Technical details
Additional information
Packing: PTFE (graphite on request)
Handwheel: plastic
Material: stainless steel 1.4571 / AISI 316 Ti
Temperature range:
with PTFE max. +200°C
with graphite max. +400°C
Pression:
Safety factor: 1.5 times
1. Form A with clamping socket
2. Inlet plug G1/2
3. Outlet plug G1/2 – left-hand thread, with corresponding clamping socket left/right-hand thread
4. Test connection M20x1.5 with end cap and sealing lens
5. Manometer valves are manufactured to DIN regulations and are used to close off pressure measurement devices.
Handwheel: plastic
Material: stainless steel 1.4571 / AISI 316 Ti
Temperature range:
with PTFE max. +200°C
with graphite max. +400°C
Pression:
Safety factor: 1.5 times
1. Form A with clamping socket
2. Inlet plug G1/2
3. Outlet plug G1/2 – left-hand thread, with corresponding clamping socket left/right-hand thread
4. Test connection M20x1.5 with end cap and sealing lens
5. Manometer valves are manufactured to DIN regulations and are used to close off pressure measurement devices.
| Type | (Cust.) Art. no. | PN | G | H | L1 | CAD | Legend | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Type | MV-R 16271 MZ-VA | Art. no. | 808.9004.080 | PN | 400.0 bar | G | 1/2 | H | 95.0 mm | L1 | 100.0 mm | CAD | - |
Packing: PTFE (graphite on request)
Handwheel: plastic
Material: stainless steel 1.4571 / AISI 316 Ti
Temperature range:
with PTFE max. +200°C
with graphite max. +400°C
Pression:
Safety factor: 1.5 times
1. Form A with clamping socket
2. Inlet plug G1/2
3. Outlet plug G1/2 – left-hand thread, with corresponding clamping socket left/right-hand thread
4. Test connection M20x1.5 with end cap and sealing lens
5. Manometer valves are manufactured to DIN regulations and are used to close off pressure measurement devices.
Handwheel: plastic
Material: stainless steel 1.4571 / AISI 316 Ti
Temperature range:
with PTFE max. +200°C
with graphite max. +400°C
Pression:
Safety factor: 1.5 times
1. Form A with clamping socket
2. Inlet plug G1/2
3. Outlet plug G1/2 – left-hand thread, with corresponding clamping socket left/right-hand thread
4. Test connection M20x1.5 with end cap and sealing lens
5. Manometer valves are manufactured to DIN regulations and are used to close off pressure measurement devices.
