MV-R 16270

Gauge valves

without test connection for pressure gauges, DIN 16 270

Gauge valves
additional picture 1
additional picture 2
Type (Cust.) Art. no. PN G H L1 CAD Legend
Type MV-R 16270 MZ-VA Art. no. 808.9003.080 PN 400.0 bar G 1/2 H 95.0 mm L1 100.0 mm CAD -
pcs

Gauge valves

without test connection for pressure gauges, DIN 16 270

SO Code: -
Art. no.: -

Technical details

G=BSP thread (parallel)
Packing: PTFE (graphite on request)
Handwheel: plastic
Material: stainless steel 1.4571 / AISI 316 Ti

Temperature range:
with PTFE max. +200°C
with graphite max. +400°C

Pression:
Safety factor: 1.5 times

1. Form A with clamping socket
2. Inlet plug G1/2
3. Outlet plug G1/2 – left-hand thread, with corresponding clamping socket left/right-hand thread
4. Manometer valves are manufactured to DIN regulations and are used to close off pressure measurement devices.
Packing: PTFE (graphite on request)
Handwheel: plastic
Material: stainless steel 1.4571 / AISI 316 Ti

Temperature range:
with PTFE max. +200°C
with graphite max. +400°C

Pression:
Safety factor: 1.5 times

1. Form A with clamping socket
2. Inlet plug G1/2
3. Outlet plug G1/2 – left-hand thread, with corresponding clamping socket left/right-hand thread
4. Manometer valves are manufactured to DIN regulations and are used to close off pressure measurement devices.